Work sheet
DEPARTMENT OF COMPUTER ENGINEERING
Linear Circuit Analysis
ASSIGNMENT NO.2
CHAPTER 3
Q no.1: What maximum voltage can be connected across a 0.5-W 270-Ω resistor without exceeding the rated power dissipation?
Q no.2Repeat exercise 3.24 for each of the following.
(a) R=510Ω,V=10V
(b) R=470Ω, I=1.95mA
(c) R=3.3Ω, V=50V
(d) V=50mA, I=0.2A
Q no.3: find the nominal resistance value and the possible resistance range of resistors having each of the following color codes,
(a) Green , blue, red, silver
(b) Brown, black , yellow , gold
(c) Brown, red, brown, gold
(d) Orange , orange, green , silver
Q no.4Find the nominal resistance value and the possible resistance range of resistors having each of the following color codes.
(a) Grey , red, red, gold
(b) Brown, black, green, silver
(c) Orange, white, black, silver
(d) Red, red, red
Q no.5Write the color code corresponding to each of the following resistor values.
(a) 470 Ω ± 5%
(b) 1.8 kW ± 10%
(c) 820 kW ± 20%
(d) 1.5 MW ± 5%
Q no.6Find the minimum possible conductance of 4.7 K-ohm resistor having 5% tolerance.
Q no.7Derive an expression for power dissipated in the resistor in terms of its conductance G and the current I through it.
Q no.7Derive an expression for the power dissipated in the resistor in terms of its and the voltage V across it.
Q no.8when a certain electric motor is operated for 30 min, it consumes 0.75 kWh of energy. During that time, its total energy loss is 3*10^5 J.
(a) What is the efficiency of the motor?
(b) How many joules of work does it perform in 30min?
Q no. 9A certain motors draw 17A from a 240-V source. If the motor is 91.5% efficient, what is the horse power rating?
Q no.10A certain system consists of 3 identical devices in cascade, each having efficiency 0.85. The first device draws 3A from a 20-V source. How much current does the third device deliver to a 50W load?
NOTE: All examples included of CH#3
SUBMITION DATE:
First published on fatsup.wordpress.com ↗